SP-Strip Brick Cleaner

We recommend that the area is firstly be swept or wiped to remove any loose growth and debris.

This is a very versatile product and can be used at many different dilution rates depending upon they type of cleaning you are undertaking. SP-Strip can be used neat or at a rate of 1:1, 1:2 (product : water) for heavy staining (or for pre-treatment of oil stained areas) or 1:5 for general cleaning.

Application can be made in several ways but you must ensure that the container is able to handle strong acidic products. If you wish to spray SP-Strip then we have a number of sprayers that are designed to handle acidic solutions especially or CLEANER and SUPER EXTREME sprayers.

After application, leave to act for 15-20 minutes (can be slightly longer in cold weather) before rinsing. If the finished surface is slightly patchy then a second application, at a dilution of 1:5, will achieve an even finish.

THIS IS A SPECIALIST CLEANING PRODUCT AND WE RECOMMEND THAT YOU TAKE APPROPRIATE PRECAUTIONS TO ENSURE THERE IS NO DAMAGE CAUSED TO SURFACES OR PEOPLE.



SP-Strip cleaning solution will cover approximately 40m2 per litre depending upon dilution rate and the type of surface being cleaned.

If I don't use an 'acid' sprayer what will happen?

If you don't use a sprayer that is designed to handle strong acidic solutions then, after a short while, the sprayer will start to fail and possibly leak either liquid or air or both. Sprayers are designed to work with different types of chemicals. If you buy a standard 'garden' sprayer then it is designed to work with herbicides, water or weak cleaning solutions. To successfully work with stronger or more aggressive chemicals then you should use a spraying unit that is designed for such chemicals. Should you require then we have a full range of both compression and knapsack sprayers to meet every chemical spraying requirement and every budget.

Why do I need to rinse the surface?

Rinsing serves a number of functions; as SP Strip is a highly acidic product it should be rinsed to ensure there is no accidental bleeding onto other surfaces. Secondly, the mechanical action of the rinsing can help to lift off dirt/staining that the SP Strip has lifted.